SET UP EARTHNET TO MAC BLUETOOTH
SET UP EARTHNET TO MAC MAC
SET UP EARTHNET TO MAC WINDOWS

Select the wireless network broadcasting from your access point to connect to it, either NETGEAR_11N or NETGEAR_11ACĤ. Click on the up/down arrow next to Network Name to see the list of available wireless networks. Click on Change Settings and input the new server address you wish to use. Select the Internet Time tab in the new window that opens up. Once the network drive has been mapped, it will. Accounts that dont have permissions to access this file/folder are unable to create a connection to the network drive. If youre prompted for a confirmation, click Connect.

SET UP EARTHNET TO MAC WINDOWS

Click on Set the time and date or Date and Time depending on your Windows environment. Enter the path for the network drive youd like to map and click Connect. Connecting to either of these SSID's is required to access the web interface and configure the access point.ģ. In the Classic Windows Control Panel there is also link called Date and Time. The wireless networks are NETGEAR_11N on the 2.4GHz band and NETGEAR_11AC on the 5GHz band. When the access point is in factory default settings it will broadcast 2 wireless networks with open security. Your Ethernet adapter is now configured with static IP 192.168.0.210 and the access point web interface is accessible at Ĭonnecting wirelessly to the access point: In the network settings select Ethernet, set Configure IPv4: Manually.Įnter IP address 192.168.0.210 in the IP address field.Įnter 255.255.255.0 in the subnet mask field. Record the IP address and subnet mask of your computer so that you can reinstate these IP address settings later.ģ. Click the Apple icon, then System Preferences.

SET UP EARTHNET TO MAC MAC

This article outlines the steps required to set a static IP address on your Ethernet adapter if using a direct connection between your Mac and the access point or wireless adapter if connecting wirelessly to the access point.Ĭonnecting directly to the access point via Ethernet cable:ġ. When all the parameters are displayed, locate and write down the MAC address.Accessing your WAC104 for the first time requires connecting your Mac to your access point and setting a static IP address on your Ethernet or wireless adapter.Type the following command: /sbin/ifconfig (on some distributions, just ifconfig).It will look something like the following: 00:0B:4D:2F:62:7A The number next to Ethernet ID is you MAC Address.Click on Advanced from the lower right.Select Ethernet from the left hand side.From the dock, select System Preferences.It may also be listed as 'Hardware Address' or 'Physical Address.' It will look something like the following: 00 0B 4D 2F 62 7Aįor Macintosh (OS 10.5 and higher) Systems Write down the MAC Address for your adapter. The MAC Address and other parameters will be displayed in the DOS window.

SET UP EARTHNET TO MAC BLUETOOTH

Select, Add a Network, Wireless or Bluetooth Printer option to find your Wireless Printer over the network.

At the prompt, type the following: ipconfig /all Go to Settings > Devices and Printers> Add a Printer.This number is often imprinted on the network card however, you may query your computer for the number, using one of the following methods: The Ethernet MAC Address is a unique identifier for network cards, of the form 05-A8-34-C3-67-B4 or 05A8342367B4 (6 pairs of digits and characters in the range A-F, which might or might not be separated by hyphens).

Set up earthnet to mac